BPMCB - 00456 TEXACO DIESEL 2

  • MSDS: BPMCB
  • Manufacturer: TEXACO INC
  • Product Name: 00456 TEXACO DIESEL 2
  • National Stock Number: 9140-00-186-5294
Product Identification

Product ID:00456 TEXACO DIESEL 2
MSDS Date:03/12/1991
FSC:9140
NIIN:00-186-5294
MSDS Number: BPMCB

Responsible Party
TEXACO, INC.
BEACON, NY 12508-0509
US

Emergency Phone: 914-831-3400 EXT. 204

Info Phone: 914-838-7204

Preparer: MANAGER, PRODUCT SAFETY

Cage: EO421

Contractor
TEXACO, INC.
509 BEACON, NY 12508-0509 US

Telephone: 914-831-3400

Cage: EO421

Ingredients

DIESEL FUEL (MIXTURE; TYPE NOT SPECIFIED)

Fraction By Weight: 100%

Hazards

LD50 LC50 Mixture:LD50 (ORAL RAT) IS 9.0 ML/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION TO THE EYES.
PROLONGED OR WIDESPREAD SKIN CONTACT MAY RESULT IN ABSORPTION OF
POTENTIALLY HARMFUL AMOUNTS OF MATERIAL. VAPORS OR MIST MAY CAUSE
IRRITATION OF THE NOSE AND THROAT. ASPIRATION MAY OCCUR DURING
SWALLOWING OR VOMITING RESULTING IN LUNG DAMAGE.
Explanation of Carcinogenicity:POSSIBLE CANCER HAZARD. CONTAINS MIDDLE
DISTILLATES WHICH CAN CAUSE CANCER BASED ON ANIMAL DATA.
Effects of Overexposure:MILD DISCOMFORT AND SLIGHT REDNESS OF THE EYE.
PAIN, REDNESS AND SWELLING BLISTER FORMATIO, AND POSSIBLE TISSUE
DESTRUCTION OF THE SKIN. NAUSEA, VOMITING, DIZZINESS, DROWSINESS,
EUPHORIA, LOSS OF COOR DINATION AND DISORIENTATION IF
INHALED.SEVERAL MOUTHFULS MAY CAUSE ABDOMINAL DISCOMFORT, NAUSEA,
AND DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN CONTACT MAY AGGRAVATE AN
EXISTING DERMATITIS.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. RESUSCITATE IF NOT
BREATHING. GET MEDICAL ATTENTION. EYES: IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL
ATTENTION. SKIN: REM OVE CONTAMINATED CLOTHING. WASH WITH SOAP AND
WATER. IF IRRITATION PERSISTS, GET MEDICAL ADVICE. INGESTION: GET
IMMEDIATE MEDICAL ATTENTION. ONLY INDUCE VOMITING AS DIRECTED BY A
DOCTOR.

Fire Fighting

Flash Point Method:PMCC
Flash Point:160F,71C
Autoignition Temp:Autoignition Temp Text:500F
Lower Limits:0.52
Upper Limits:4.10
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL. WATER OR FOG MAY CAUSE FROTHING.
Fire Fighting Procedures:COOL FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
IF LEAK/SPILL HASN'T IGNITED, USE WATER SPRAY TO DISPERSE VAPORS &
PROVIDE PROTECTION FOR PERSONS FIGHTING FIRE.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:VENTILATE AREA. AVOID BREATHING VAPOR. USE
SCBA FOR LARGE SPILLS OR CONFINED AREAS. CONTAIN SPPILL IF
POSSIBLE. WIPE UP OR ABSORB ON SUITABLE MATERIAL AND SHOVEL UP.
PREVENT ENTRY INTO SEWERS AND WATE RWAYS. AVOID CONTACT WITH SKIN,
EYES ORCLOTHING.
Neutralizing Agent:NOT APPLICABLE.

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT & OPEN FLAME. A
PLACARD IS REQUIRED ONLY WHEN MATERIAL IS CONTAINED IN PACKAGING OR
CONTAINER THAT EXCEEDS 110 GALLONS OR TANKER.
Other Precautions:CAUSES SEVERE SKIN BURNS. HARMFUL IF INHALED. MAY BE
HARMFUL IF ABSORBED THROUGH SKIN. MAY CAUSE DIZZINES & DROWSINESS.
ASPIRATION HAZARD IF SWALLOWED--CAN ENETR LUNGS & CAUSE DAMAGE.
COMBUSTIBLE LIQU ID & VAPOR. USE ONLY AS FUEL.

Exposure Controls

Respiratory Protection:IF VAPOR, MIST OR DUST IS GENERATED, USE
RESPIRATOR APPROVED BY MSHA OR NIOSH AS APPROPIATE. SUPPLIED AIR
RESPIRATORY PROTECTION SHOULD BE USED FOR CLEANING LARGE SPILLS OR
UPON ENTRY INTO TANKS, VESS ELS OR CONFINED SPACES.
Ventilation:LOCAL EXHAUST VENTILATION RECOMMENDED IF GENERATING VAPOR,
DUST OR MIST, IF NOT AVAILABLE USE NIOSH APPROVED RESPIRATOR.
Protective Gloves:PETROLEUM RESISTANT
Eye Protection:SAFETY GOGGLES WITH OPTIONAL FACE SHIELD
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER.
INDUSTRIAL-TYPE WORK CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
THIS PRODUCT IS INTENDED FOR USE AS A MOTOR FUEL ONLY. THIS PRODUCT IS
NOT INTENDED FOR USE IN SPACE HEATERS. DO NOT USE IN AGRICULTURAL
SPRAYS. DO NOT USE THIS PRODUCT IN SPRAY APPLICATIONS.

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:650F,343C
Vapor Pres:LOW
Spec Gravity:0.8521
Solubility in Water:NIL
Appearance and Odor:CLEAR AND BRIGHT LIQUID
Percent Volatiles by Volume:100%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:TOXIC LEVELS OF CARBON MONOXIDE,
CARBON DIOXIDE, IRRITATING ALDEHYDES AND KETONES.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH ALL
APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.